Build a Lego Helicopter in SolidWorks 3D CAD

磁链地址复制复制磁链成功

magnet:?xt=urn:btih:041152798F9895491544127FA913219F59AA1CC0

如发现链接(DMCA)违规请在线举报

在线播放复制链接

磁链详情

文件数目：146个文件
文件大小：2.93 GB
收录时间：2025-09-27
访问次数：12
相关内容：Build Lego Helicopter SolidWorks

文件meta

19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/2. Stage 22 Finishing the Helicopter and Adding Mechanical Mates.mp4
146.29 MB
10. Stage 9 Making the Cockpit Area/1. Create the Right Angle with Curve Part.mp4
136.55 MB
15. Stages 16 and 17 Making the Tail Rotor Section/2. Creating the Tail Fairing Part.mp4
132.74 MB
2. Stage 1 Building the Fuselage Base/2. Making the Right Angle Beam - Part 1.mp4
123.15 MB
16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/2. Creating the Tail Rotor Part.mp4
94.17 MB
12. Stage 11 Make the Upper Fuselage/2. Stage 11 Make the Upper Fuselage Section, and Troubleshooting.mp4
92.92 MB
2. Stage 1 Building the Fuselage Base/3. Making the Right Angle Beam - Part 2.mp4
91.37 MB
2. Stage 1 Building the Fuselage Base/6. Creating the first Subassembly.mp4
90.5 MB
14. Stages 13, 14 and 15 Building Up the Other Side of the Helicopter/1. Stages 13, 14 and 15 Building Up the Other Side of the Helicopter.mp4
89.49 MB
12. Stage 11 Make the Upper Fuselage/1. Create the Four Beam with Extension Part.mp4
84.9 MB
3. Stage 2 Expanding the Fuselage/2. Making the Right Angle Beam.mp4
84.58 MB
2. Stage 1 Building the Fuselage Base/1. Creating the Axle.mp4
82.5 MB
19. Stage 22 Finishing the Helicopter and Adding Mechanical Mates/1. Making the Main Rotor Blades.mp4
74.04 MB
13. Stage 12 Create the Main Rotor/2. Making the Axle Joint Part.mp4
70.1 MB
16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/3. Making the Half Bevel Gear Part.mp4
69.06 MB
1. Introduction/Instructions - Lego Helicopter 30465.pdf
67.11 MB
3. Stage 2 Expanding the Fuselage/4. Making Stage 2 - The Fuselage.mp4
66.76 MB
7. Stage 6 Adding the Tail Rotor Transmission/2. Making the Large Bush Part.mp4
65.51 MB
4. Stage 3 Adding to the Fuselage/2. Making the Cross Block Connector.mp4
65.4 MB
2. Stage 1 Building the Fuselage Base/4. Building the Friction Pin.mp4
62.53 MB
2. Stage 1 Building the Fuselage Base/5. Making the Pin with Bore.mp4
62.48 MB
17. Stage 20 Starting the Skids/1. Creating the Pin with Large Bush Part.mp4
62.21 MB
4. Stage 3 Adding to the Fuselage/3. Building Stage 3 - the Upper Fuselage.mp4
58.12 MB
11. Stage 10 Building Up the Cockpit Rear Section/3. Stage 10 Make the Main Rotor Hub Section.mp4
57.31 MB
13. Stage 12 Create the Main Rotor/3. Stage 12 Adding the Main Rotor Shaft.mp4
56.49 MB
4. Stage 3 Adding to the Fuselage/1. Creating the Long Pin Part.mp4
48.99 MB
5. Stage 4 Building the Tail Section/1. Building the 7-Long Beam.mp4
48.48 MB
7. Stage 6 Adding the Tail Rotor Transmission/4. Stage 6 Adding the Tail Rotor Transmission.mp4
47.16 MB
18. Stage 21 Finishing the Skids and Tail/2. Stage 21 Finishing the Skids and Tail.mp4
46.73 MB
7. Stage 6 Adding the Tail Rotor Transmission/3. Making the Bevel Gear.mp4
46.32 MB
16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/4. Stages 18 and 19 Adding the Tail Section.mp4
46.18 MB
18. Stage 21 Finishing the Skids and Tail/1. Making the Light Stud and Pin with Stud Parts.mp4
45.41 MB
11. Stage 10 Building Up the Cockpit Rear Section/1. Make the Three-Long Cross Block Part.mp4
42.92 MB
16. Stages 18 and 19 Adding the Tail Section to the Main Assembly/1. Making the Pin with Axle Part.mp4
41.49 MB
8. Stage 7 Building Up the Helicopter Body/2. Stage 7 Building Up the Main Rotor Hub.mp4
39.51 MB
9. Stage 8 Adding the Helicopter's Nose Section/1. Stage 8 Adding the Helicopter's Nose Section.mp4
39.39 MB
17. Stage 20 Starting the Skids/2. Stage 20 Starting the Skids.mp4
35.88 MB
5. Stage 4 Building the Tail Section/3. Stage 4 Creating the Tail Boom.mp4
33.28 MB
15. Stages 16 and 17 Making the Tail Rotor Section/3. Stages 16 and 17 Making the Tail Section.mp4
31.88 MB
8. Stage 7 Building Up the Helicopter Body/1. Creating the Two Block with Axle Holes.mp4
30.12 MB
11. Stage 10 Building Up the Cockpit Rear Section/2. Create the Axle with Bore Part.mp4
29.47 MB
6. Stage 5 Adding the Tail Rotor Transmission Housing/1. Making the One-Sided Pin with Bore.mp4
28.87 MB
3. Stage 2 Expanding the Fuselage/3. Creating the Small Bush Part.mp4
28 MB
3. Stage 2 Expanding the Fuselage/1. Creating a Longer Axle Using Configurations.mp4
27.79 MB
15. Stages 16 and 17 Making the Tail Rotor Section/1. Making the 2-Long Axle Part.mp4
27.61 MB
6. Stage 5 Adding the Tail Rotor Transmission Housing/2. Stage 5 Adding the Tail Rotor Transmission Housing.mp4
25.15 MB
1. Introduction/1. Welcome to the Course.mp4
25.1 MB
5. Stage 4 Building the Tail Section/2. Making the 5-Long Beam.mp4
21.66 MB
10. Stage 9 Making the Cockpit Area/2. Stage 9 Create the Cockpit Side.mp4
13.71 MB
7. Stage 6 Adding the Tail Rotor Transmission/1. Creating the 9-Long Axle Part.mp4
13.04 MB